Questo prodotto è compatibile con .
per verificare la compatibilità di questo prodotto con il tuo modello
Cavo Length: 3 '/914 mm
Diameter: 5 mm/0.2 "
Peso: 38 g
AS of 11/18/2014, these FTDI cavi come with a Clear USB Head and RX/TX LED so you can see your cavo FTDI Working.
Just about all Electronics use TTL serial For debugging, bootloading, programming, serial output, ecc. but It' s rare For A Computer to have a Serial Port anymore. This is a USB to TTL serial cavo, with a FTDI FT232RL USB/seriale chip embedded in the head. It has a 6-pin Socket at the End With 5 V Power and Ground, AS Well as RX, TX, RTS e CTS at 3 V Logic levels. These are perfect for use with a Boarduino, Meggy 's, or other Arduino clones and derivatives, and Fuzeboxen. USEFUL whenever you want to communicate with a TTL serial device, such as an XBee. New. We Now have a Version with a Translucent Body and RX/TX LEDs. Now it' s Easier than Ever to debug your setup or See data transfer, The Red and Green LEDs Will Blink when data is transmitted/received by the FTDI Chip. The version we have is the 3.3 V. The data signals are at 3 V and The Power Line provides 5 V. we suggest This For any Product that needs FTDI cavi. Because the Cable is 5 V-logic compliant, you can use it with 3 V or 5 V Logic Just Fine - No Level Shifting required.. If you have a device that is Running at 5 V Logic and requires 5 V Power, this cavo Will Work fine. If you want to Tweak The voltages and signals a little, you should also check out the FTDI Friend This Cable is fully compatible with the ttl-232 cavo from FTDI. You can download The drivers and the Diagram/Spec Sheet which has Mechanical cavo Details.
Adafruit FTDI Serial TTL-232 USB Cable  - B06XFXQ5TC